Home
About Us
Order QuickPaq
How It Works
Contact Us

 

 

 

 

 

Follow QuickPaq Instructions For Packing And Shipment Of QuickPaq Lamp Recycling Containers

1. Unpack and seal bottom of box.

Unpack QuickPaq box. Close the bottom flaps in order (1>2>3). Remove adhesive strip and seal down final flap.



2. Tape edges of box.

With flaps properly closed, carefully seal all sides and corners of the bottom of the box with 3" wide plastic tape.

Do not use masking tape.
Do not ship with edges or corners exposed.



3. Insert Bag Liner Inside Of Box And Fill With Lamps Until Full.

Place box in secure position. Fill in the "ACCUMULATION DATE" with a permanent marker in the space provided below. Before loading lamps, insert provided plastic bag inside box to act as a liner. Carefully fill the entire box with fluorescent lamps within the plastic liner and avoid breakage. QuickPaq customer service can assist with broken or crushed lamps. Contact customer service toll free at 732.370.4100 for more information.



4. Seal plastic bag inside of box.

Fold plastic bag ends and secure with 2" or 3" plastic packaging tape. Make sure that the plastic bag is completely sealed.



5. Seal top of box.

Close the top flaps in order (1>2>3). Remove adhesive strip and seal down final flap.



6. Tape edges of box and fill out the label.

With flaps properly closed, carefully secure all sides and corners of QuickPaq box with 3" wide plastic tape.

DO NOT USE MASKING TAPE. DO NOT SHIP WITH EDGES OR CORNERS EXPOSED.



7. Arrange for pickup.

To arrange for pickup call either Fedex or UPS and ship back to the following location:

SAMR Inc. 1950 Rutgers University Blvd Lakewood, NJ 08701